光纖飛秒激光系統（BlueCut, Menlo）可以輸出高功率重頻可調的飛秒激光脈沖，波長為1030 nm，最大功率可達10 W，脈寬最低可以壓縮到200 fs，重復頻率可以從10 KHz到10 MHz可調，可用於多光子顯微成像👍🏽、激光生物調製等多個生物醫學光子學研究領域👨🏽‍🚒🌡。

The femtosecond fiber laser system (BlueCut, Menlo) outputs high-power femtosecond pulses with tunable repetition rate. The wavelength is 1030 nm and the maximum power is 10 W. The pulse width can be compressed as short as 200 fs. The pulse repetition rate ranges from 10 KHz to 10 MHz. This system can be used in multiphoton microscopy, biophotomodulation, and other related fields in biomedical optics.

高重頻可調諧脈沖激光器(AVUS, APE)利用光參量放大器，在高功率飛秒激光的泵浦下🧜🏿‍♀️，可以輸出波長從610 nm到2000 nm連續可調的飛秒激光脈沖🌿，其中在610 nm-1000 nm功率可以達到300 mW🐆🧑‍🧑‍🧒‍🧒，在1000 nm-2000 nm範圍最大功率可達1 W♻，可以用於多光子顯微成像、多光子飛秒生物加工等前沿領域🫸🏼。

The tunable pulsed laser with high repetition rate (AVUS, APE) outputs tunable femtosecond laser pulses from 610 nm to 2000 nm by the optical parametric amplifier pumping with a high-power femtosecond laser. The output power is 300 mW at the range of 610 nm – 1000 nm, and 1 W at the range of 1000 nm – 2000 nm. This system can be used for multiphoton microscopy, biological micromachining, and other related fields.